RBR MACH Series III w/ Adjust RBR Suspension System

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

RBR MACH Series III w/ Adjust RBR Suspension System

The RBR MACH III is a specialty design helmet providing full IIIA protection for operators requiring stealth as a mission critical consideration.
FEATURES:

Ideal for long range operators including snipers and agents requiring stealth as an operational requirement

V-50 Performance exceeds 2100 FPS

Tested and certified by H.P. White Labs withstanding multiple impact IIIA ballistics

Tested to H.P. White helmet test procedure for IIIA performance (HPW-TP-0401.01B)

Special design cut for integrated muff-style communications

4-Point Comfort Plus suspension system

Tested to MIL-STD 662E for fragmentation performance

Weight: 2.4 Lbs to 2.6 Lbs

Colors: Black, Olive Drab and Tan

Sizes: Medium (Up to 7 1/4") & Large (7 1/4" and above)

Optional Mil-Spec multi-pad suspension system capable

RBR MACH III ADVANCED COMBAT HELMET is based on the original Special Forces MICH Design with a focus toward reduced coverage integrating larger muff-style communications. The MACH III was designed for Military and Police special tactical units where compatibility with all NV and communication systems is of critical importance along with wearer comfort. Helmets provide un-matched Level IIIA protection and include the RBR 4-point suspension system secured with only four bolts to ensure maximum ballistic integrity, comfort and stability. The RBR Mach III Helmet is fitted with a fully adjustable padded head harness, attached via four (4) fastener screws. The head harness includes leather covered front padding, nylon covered rear padding and leather comfort crown pad. RBR Helmets are fully adjustable in the circumference as well as the wearing height; therefore, two sizes can be adjusted to fit all heads.
RBR Ballistic Helmets are tested at H.P. White Laboratory at Level IIIA. Helmets are tested versus penetration and back face deformation of Level IIIA 9mm and .44 Magnum ammunitions, to the HP White Helmet Test Procedure (HPW-TP-0401.01B). Additionally, this test requires that one of each of the above rounds must impact directly on a suspension system fastener resulting in zero penetration. The entire line of helmets from RBR Tactical, have been further tested to MIL_STD 662E for fragmentation performance. All of the RBR Helmets maintain V-50 performance at over 2100 feet per second, surpassing the Mil Spec of 2000 feet per second. RBR Test Results are available upon request.
Testing is Critical to Performance! Commonly found misconceptions include NIJ Certified IIIA helmets. The NIJ Certification for helmets only provides for testing up to level II, and does not measure back face deformation. Likewise, Level IIIA Testing to NIJ Standard 0108.01 for Ballistic Material is for testing flat armor panels only, and specifically excludes helmets from being tested to this standard. RBR is confident that the HP White Helmet Test Procedure is the most comprehensive helmet test standard currently available. Helmets that cannot meet the requirements of this Level IIIA test should be considered substandard.

Price: $372.47
Buy Product Online | Visit Store Home

Manufactured by RBR Tactical Armor

Other Items from RBR Tactical Armor

RBR Combat Helmet, IIIA -

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

RBR Combat MK II Helmet, IIIA -

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

RBR PASGT Helmet, IIIA -

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

RBR Padded Helmet Bag -

Cutting Edge Tactical carries the entire RBR Tactical Product Line.

RBR Helmet Cover -

Cutting Edge Tactical carries the entire RBR Tactical Product Line.